进口机器Import Wire Cut E.D.M.
一.三菱慢线切割机品号 Mitsubishi Wire Cut E.D.M. Parts
1.1三菱钻石眼模 (线导引头) 钻石螺丝 Wire Guide(Diamond Guide)for EDM 2
1.2三菱给电板Power Feed Contact 3
1.3三菱上下机头/零配件Upper / Lower Dies Block / Connected Parts 4
1.4三菱喷水头 (上)Water Nozzle (Upper). 6
1.5三菱喷水头(下) Water Nozzle (Lower) 8
1.6三菱出线轮 引线轮 轴心 Pinch Roller / Wire Roller / Capstan Roller Shaft 10
1.7三菱上下绝缘板 Isolator Plate 13
1.8三菱 剪线器 校正器 档水墙Cutter Unit
14
1.9三菱零配件 Connected Parts 15
二.沙迪克慢线切割机品号 Sodick Wire Cut E.D.M. Parts
2.1钻石眼模Diamond Guide 16
2.2给电板Power Feed Contact 17
2.3喷水头 Water Nozzle 18
2.4零配件 Connected Parts 20
三.西部慢线切割机品号 Seibu Wire Cut E.D.M. Parts
3.1钻石眼模 (线引导头) ,给电板 (导电块) Diamond Guide / Power Feed Contact 22
3.2喷水头 Water Nozzle 23
3.3绝缘板 ,上下机头零件 Isolator Plate / Upper / Lower Dies Block 24
四.发那科慢线切割机品号 Fanuc Wire Cut E.D.M. Parts
4.1钻石眼模 (钻石导引头) Diamond Guide
26
4.2给电板 (通电块) Power Feed Contact
27
4.3喷水头 (水罩头) ,皮带 Water Nozzle / Belt 28
4.4绝缘板 , 出线轮 , 零配件 Isolator Plate & Pinch Roller, Connected Parts 30
4.5张力轮 , 滚轮 , 零配件 Tension Roller & Wire Sub Roller, Connected Parts 31
4.6零配件Connected Parts 33
五.JAPAX慢线切割机品号 Japax Wire Cut E.D.M. Parts 35
六.其它进口慢线切割机品号Other import Wire Cut E.D.M. Parts 37

七.台湾机器
7.1庆鸿慢线切割机品号 Chmer Wire Cut E.D.M. Parts 39
7.2健升慢线切割机品号 Jiann Sheng Wire Cut E.D.M. Parts 41
7.3亚特慢丝切割机品号ya te Wire Cut E.D.M. Parts 43
八.慢走丝线切割机周边配件及耗材 Wire Cut E.D.M. Parts & Consumptive material
8.1日本放电加工用电极线Japanese Brass Wire For Wire Cut E.D.M 44
8.2过滤网 (水用) Filter (type:water) 45
8.3过滤网 (油用) Filter (type:oil) 48
8.4不锈钢治具Stainless Steel Jig tools 51
8.5不锈钢螺丝及押板 Stainless Steel Screw & Jig Holder 53
8.6离子交换树脂Ion exchange resin 55
8.7防锈剂,除锈剂,细穴加工液 Antirust 、RUST REMOVER 、Cleaner 56
8.8高压泵high pressures pumps 58
8.9强力磁铁及线张力计Magnet、Wire Tension Tester 60
九.细孔放电机（打孔机）专用配件及耗材 EDM drilling machine Parts & Consumptive material
9.1电极眼模(铜管导嘴)Pipe Guide 61
9.2夹头Collet 64
9.3止水塞Stopper 66
9.4电极铜管(红/黄铜管) Electrode tubes（copper / brass） 67
9.5电极铜管(8字管) Electrode tubes(8-shaped tubes) 69
9.6铜丝 Brass Wire 70